Mounts above a 60" (1500mm) wide or narrower belt (See drawing for details)
Up to 12" (300mm) working gap

MODEL AND CLASSIFICATION:
* Model: OCP 3415E (60Hz) Extended Length
* Type: Permanent Magnet Overband Separator
* Application: Automatic ferrous metal extraction from conveyor belt systems where elongated wrap-around conveyor configuration may prevent intrusion of ferrous wire, banding or cables.

PERFORMANCE AND CAPACITY:
* Maximum Primary Conveyor Belt Width: 1500 mm
* Typical Working Gap: 300 mm
* Nominal Height at 300 mm Working Gap: 457 mm
* Operational Requirement: Overband belt speed should exceed primary conveyor speed for optimal performance

MOTOR AND DRIVE:
* Motor Power: 2.2 kW
* Electrical Supply: 480V / 3 Phase / 60 Hz
* Belt Speed: Approximately 1.5 mtrs/sec
* Drive Features: Includes integrated electrical isolator
* Service Weight (Drive Component): 41 kg

DIMENSIONS AND WEIGHT:
* Overall Length (Including Flights): 4235 mm
* Overall Width: 1437 mm
* Overall Height: 653 mm
* Suspension / Lifting Centers (Length): 1500 mm
* Suspension Centers (Width): 1092 mm
* Lifting Centers (Width): 1192 mm
* Total Unit Mass: 1726 kg
* Maximum Suspension Point Load: 897 kg

CONSTRUCTION AND MATERIALS:
* Cleaning Belt Width: 850 mm
* Cleat Specification: 50 mm typical flights
* Frame Components: 25 mm thick steel plate sections
* Suspension Hardware: Dual Ø30 mm mounting points

INSTALLATION NOTES:
* Safety: Open magnetic field; full risk assessment required upon installation
* Magnetic Interference: All equipment within 1000 mm of the magnet must be non-magnetic
* Discharge Requirements: Client-supplied non-magnetic discharge chute required, positioned under belt edge
* Placement: Optimal performance achieved when positioned between conveyor idlers